FULL HD TV Software

ITV.V59.671-USB FIRMWARE

Board Model: ITV.V59.671
Board TypeUniversal Board
Display resolution1920×1200 FHD
Screen SupportFrom 19 to 26 INCH
Type Of TelevisionLED TV Full HD
Led back Light220mA to 300 mA
Aspect  Ratio4:3,16:04,16:10
SystemPAL/SECAM/NTSC
Audio Output Power2×5 W (8 OHMS)
Panel Volt+3.3V/+5V/+12V DC
Working Input VoltAC 220V
Maximum Current300 mA (Without panel)
Stand By power<0.2 W (For mother Board only)
Maximum Current for USB 500 mA
Steps To Upgrade Software
1. Take a UDISK and Format at Fat32
2. Copy the Firmware (BIN FILE) In USB Disk
3. Plug USB Disk into USB Port of LED TV
4. Switch On the Power and Wait till IR Indicator led stops Flashing
5. Unplug USB Disk and your Software will be ready

Leave a Comment

Your email address will not be published.

You may also like