Indesit Digital display codes
Please select an error code to reveal the fault and a how to fix it yourself.
F01 | F02 | F03 | F05 | F06 | F07 | F08 | F09 | F11 | F12 | F13 |
F15 | F16 | F18 |
- F01
F01 — Electronic circuit board fault
Issue: Washing Machines is not operating – some or all functions are not selectable.
Advice: We recommend you disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes. Reconnect supply and wait 30 seconds and try starting the machine again.
- F02
F02 — Motor circuit fault
Issue: Intermittent or no drum rotation during wash cycle.
- F03
F03 — Temperature sensing fault
Issue: Washing Machines not heating on wash or dry settings.
- F05
F05 — Waste pipe blockage or pump issue
Issue: Washing Machines door will not open / the door can be opened but water remains inside the drum.
- F06
F06 — Door lock fault
Issue: Washing Machines door cannot be opened or closed / when the door is closed the machine the programme will not start.
- F07
F07 — Electronic circuit board fault / heating circuit fault
Issue: During a wash cycle the programme pauses part way through/ the machine is not heating and the pump runs continuously.
- F08
F08 — Heater fault
Issue: During a wash cycle the programme pauses part way through.
- F09
F09 — Software fault
Issue: Washing Machines isn’t operating multiple flashing lights and/or display. Unable to select a programme.
- F11
F11 — Pump circuit fault
Issue: Water remains in Washing Machines / not pumping out.
- F15
F15 — Heater control fault (Washing Machine and Washer Dryers)
Issue: Washing Machines is not heating water or pauses during a wash cycle / not drying or pauses during drying cycle.
- F16
F16 — Drum lock position sensor fault (top loading machines only)
Issue: Washing Machines drum is stopping in the wrong position or is not locked in the correct position.
- F18
F18 — Internal data error
Issue: Some or all display / functions do not work on my washing machines.
Advice: Please disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes. Reconnect supply, wait 30 seconds and try starting the machine again.
Flashing LED codes
Please select all the flashing LED’s in sequential order to reveal what your error code could mean.
LED1 | LED2 | LED3 | LED4 | LED5 | Reset |
If the LED’s are arranged differently please select an alternative configuration.
Horizontal interface | Vertical interface
Advice: If the fault remains, we recommend you call Us for service on:
+965 66398651
+965 94942300
Whats App Direct Link: – http://Wa.me/+96566398651
Whats App group Link: – https://chat.whatsapp.com/CGmau68tmrII4jEYpI8XlN